PMU M1カートリッジのサイズ解説:直径と針の配置を比較する方法

バイオマスタトゥーが執筆
M1は針の構成を表す名称であり、カートリッジ全体のサイズを表すものではありません。このガイドでは、直径、針の本数、針の配置幅、テーパーを分けて説明し、カートリッジを比較するためのチェックリストを並べて掲載しています。
PMU M1カートリッジのサイズ解説:直径と針の配置を比較する方法

重要なポイント

  • M1 identifies a needle configuration, not the full size of a cartridge.
  • Needle diameter と needle count describe two different features.
  • Grouping design, taper, と machine compatibility also affect cartridge selection.
  • Check the complete product code と manufacturer specifications before purchasing.

Two PMU M1 cartridges can carry the same label but have different diameters, needle counts, と designs. Knowing how to read these details helps artists compare products and select suitable equipment for their work. This starts with identifying the M1 configuration, then checking the specifications that affect its working characteristics.

What Is an M1 PMU Cartridge?

M1 is a common needle configuration used for shading and color filling.

What Does M1 Mean?

M1 commonly refers to A Magnum needle configuration. It uses multiple needles arranged in a grouping designed to cover a wider area than a single needle. This makes it useful for shading と filling work.

The exact structure can vary across manufacturers. Some product lines use M1 for a specific flat Magnum arrangement, while other naming systems may describe the grouping differently. Artists should check the manufacturer's description rather than rely on the code alone.

M1 describes the needle configuration, not the needle diameter, total width, or taper. These details require separate checks when comparing a PMU cartridge M1 with another model.

Where Are M1 Cartridges Commonly Used?

M1 cartridges are commonly associated with shading と color filling in permanent makeup. Depending on the specific design and the artist's technique, they may be used for:

  • Powder brows: Building a soft, shaded appearance across the brow.
  • Ombré brows: Creating a gradual change in color intensity.
  • Selected lip shading techniques: Applying pigment across a broader area of the lips.

Not every M1 cartridge is suitable for every procedure. The needle configuration, diameter, device, and artist's training all affect the selection. Artists should follow the manufacturer's intended-use instructions and their professional training.

M1カートリッジのサイズ仕様の読み方

カートリッジのパッケージのマーキングは、最初は紛らわしく見えるかもしれません。直径、針の数、グループ、テーパーに分けて考えると、単一の数値に頼らずにカートリッジの針のサイズを比較しやすくなります。

Needle Diameter: What Do 0.25 mm, 0.30 mm, と 0.35 mm Mean?

針の直径は、個々の針の太さを表し、通常はミリメートルで測定されます。 , usually measured in millimeters. Common examples in PMU products include 0.25 mm, 0.30 mm, と 0.35 mm, although availability depends on the product line.

これらのサイズは、異なる針の太さを表します。

  • 0.25 mm: 比較的細い針の直径。
  • 0.30 mm: 上記と下記の 2 つの例の中間のオプション。
  • 0.35 mm: A thicker needle diameter than 0.25 mm or 0.30 mm.

直径は針の剛性と色素の転写特性に影響を与える可能性があります。ただし、直径が大きいからといって、必ずしも結果が濃くなる、色素がより深く配置される、または色が長持ちするとは限りません。

最適な比較では、直径に加えて、針の数、テーパー、グループ化のデザイン、およびメーカーの仕様を考慮します。アーティストは、肌質のみに基づいて直径を選択すべきではありません。

Needle Count: What Do 5M1 と 7M1 Indicate?

一般的なカートリッジ命名システムでは、M1 の前の数字は針の数を示します。 . A 5M1 typically has five needles, while a 7M1 typically has seven.

特徴 5M1 7M1
標準的な針数 5 7
個々の針の直径 製品ラベルを確認してください 製品ラベルを確認してください
潜在的なカバー範囲 グループ設計によって異なります 同等の条件下では、より広くなる場合があります
実際のグループ幅 メーカーのデータを確認してください メーカーのデータを確認してください

針数が多いと、グループの幅と分布が変わる可能性があります。すべてのアプリケーションで、より広い最終的な色素領域やより良い結果が保証されるわけではありません。

The spacing between needles, individual needle diameter, and arrangement all affect the overall dimensions. For an accurate comparison, look for A published grouping width rather than estimating it from the needle count alone.

How Do Gauge Numbers と Cartridge Codes Work?

Some manufacturers use gauge-related numbers or coded product names to describe needle specifications. Common examples include #08, #10, と #12, which may correspond to nominal diameters of 0.25 mm, 0.30 mm, と 0.35 mm in certain product systems.

These mappings are not universal. A code may also include the needle count, configuration, or taper.

For example, a product label might include a diameter code, a number for the needle grouping, と the letters M1. Other products may use a different order or add a suffix for a specific design. Check the manufacturer's size chart to confirm each part of the code.

ThunderlordPower M1 マグナム 標準タトゥーペン用汎用カートリッジニードル

Price : $8.99 ~ $22.99
Thunderはタトゥー・アートメイク用の汎用ニードルです。対応機器:Biomaser Universalマシン または 標準タトゥーマシン ThunderlordPower カートリッジニードル フラットマグナム カートリッジは100% EOガス滅菌済みで、個別包装されています。  ニードルは316医療用グレードのステンレス製。...
Learn more

How Do Diameter と Needle Grouping Affect PMU Cartridge Performance?

Specifications help artists compare cartridge designs, but they do not predict every result. Understanding the role of each feature makes it easier to judge the differences without relying on broad claims about performance.

How Needle Diameter Influences Rigidity と Pigment Transfer

Needle diameter affects the thickness と rigidity of each needle. Other design features, including taper and grouping, also influence how the needle performs during use.

A finer needle と a thicker needle may behave differently, but diameter alone cannot predict pigment retention, skin response, or the finished appearance.

When comparing permanent makeup needles, look at the full specification rather than assuming that a thicker needle always deposits more pigment. Machine settings, technique, pigment properties, と the intended procedure also contribute to the outcome.

How Needle Count と Grouping Design Affect Coverage

Needle count と grouping design determine how multiple needles are arranged within the cartridge. Under comparable conditions, a grouping with more needles may cover a wider area, but the exact dimensions depend on the design.

次の 3 つの測定値は区別する必要があります。

  • 針の直径: 個々の針の太さ。
  • グループ幅: 組み立てられた針グループの物理的な幅。
  • 適用幅: パス中に影響を受ける領域。これは、技術と操作条件にも依存します。

These measurements are related, but they are not interchangeable. A 7M1 cartridge does not always produce a wider application area than every 5M1 cartridge. Different needle spacing or construction can change the comparison.

類似の M1 カートリッジを比較する際にテーパーが重要な理由

テーパーとは、針軸から先端への移行部の形状と長さを指します。一部のメーカーは、テーパーを ショート、ミディアム、ロング、エクストラロングに分類しています。.

テーパーは、針の挙動や顔料の転写特性に影響を与える可能性があります。直径と針の本数が同じ 2 つのカートリッジでも、テーパーの設計が異なると、性能が異なる場合があります。

購入前に M1 カートリッジを比較する方法

明確な仕様により、アーティストはカートリッジを並べて比較し、選択肢を絞り込むことが容易になります。

仕様を並べて比較します

比較表を使用して、検討対象の各カートリッジの詳細を記録します。

仕様 カートリッジ A カートリッジ B
フルモデルコード ラベルを確認 ラベルを確認
針径 記録単位:mm 記録単位:mm
針数 確認 確認
グループ構成 M1 デザインを確認 M1 デザインを確認
テーパー メーカーデータの確認 メーカーデータの確認
グループ幅 公開されている場合は記録 公開されている場合は記録
機械との互換性 検証 検証
滅菌および単回使用ラベル ​​パッケージの検証 ​​パッケージの検証

This method is useful when comparing cartridge needles for PMU from different product lines. It also helps identify missing information that may require confirmation from the supplier.

Check Machine Compatibility と Cartridge Construction

Not every cartridge fits every PMU machine. Check the cartridge connection, the device manufacturer's compatibility instructions, と any limits listed in the product documentation.

Cartridge construction also deserves attention. Some designs include A membrane intended to help prevent fluid backflow into the device. Check the manufacturer's information to confirm the design と its intended function.

Match the Specifications to the Intended Technique

The appropriate cartridge depends on the planned procedure, desired working characteristics, device, と the artist's training. A cartridge selected for shading may not be the best option for a different technique.

Artists should also check the sterile packaging and single-use labeling. Use a new sterile cartridge for each client and dispose of used needles in an appropriate sharps container under applicable local requirements.

The FDA warns that unsterile tattooing equipment と needles can transmit infections. It also notes that contaminated tattoo inks can cause infections, even when other hygiene practices are followed. Cartridge selection should therefore include hygiene と product handling, not just size and performance.

Compare the Complete M1 Cartridge Specifications

M1 identifies a needle configuration, but it does not describe every feature that affects cartridge selection. Diameter, needle count, grouping design, と taper each provide different information.

Before purchasing, compare the complete model code, confirm machine compatibility, と check the manufacturer's specifications. A clear comparison helps PMU artists choose equipment that fits their intended technique and professional requirements.

FAQs About PMU M1 Cartridge Sizes

Q1: Are M1 Cartridges Compatible With All PMU Machines?

番号 Compatibility depends on the cartridge connection と the machine's design. Check the device manufacturer's instructions and confirm that the specific cartridge model is supported.

Q2: What Is the Difference Between M1 と RM or CM Cartridges?

M1 commonly refers to a Magnum grouping, while RM or CM often identifies A curved Magnum design. The curved edge changes the needle arrangement, but naming conventions vary by manufacturer. Check the product specifications to confirm the exact construction.

Q3: Can M1 Cartridges Be Used for Lip Blush?

Some M1 designs may be intended for selected lip-shading techniques, but not every configuration is suitable for lip blush. Artists should follow the cartridge manufacturer's intended-use instructions, their training, and the requirements of the procedure.

Q4: How Should PMU Cartridge Needles Be Stored と Disposed Of?

Keep sterile cartridges in their original packaging according to the manufacturer's storage instructions. Check package integrity before use, never reuse a single-use cartridge, and place used needles in an appropriate sharps container. Follow local rules for sharps disposal and infection control.

バイオマスタトゥー

バイオマスタトゥー

2002年創業のBiomaserは、アートメイクとタトゥー用のマシン、カートリッジ、色素を専門とし、70以上の市場のプロを支えています。「Art · Technology · Beauty」を指針とし、「Connecting Artists With More」というビジョンのもとで活動しています。