PMU M1 카트리지 크기 설명: 직경 및 바늘 그룹 비교 방법

바이오마서 타투 작성
M1은 카트리지 전체 크기가 아닌 바늘 배열을 나타냅니다. 이 가이드에서는 직경, 바늘 개수, 그룹핑 폭 및 테이퍼를 구분하고 카트리지를 비교할 수 있는 체크리스트를 제공합니다.
PMU M1 카트리지 크기 설명: 직경 및 바늘 그룹 비교 방법

주요 내용

  • M1 identifies a needle configuration, not the full size of a cartridge.
  • Needle diameter 와 needle count describe two different features.
  • Grouping design, taper, 와 machine compatibility also affect cartridge selection.
  • Check the complete product code 와 manufacturer specifications before purchasing.

Two PMU M1 cartridges can carry the same label but have different diameters, needle counts, 와 designs. Knowing how to read these details helps artists compare products and select suitable equipment for their work. This starts with identifying the M1 configuration, then checking the specifications that affect its working characteristics.

What Is an M1 PMU Cartridge?

M1 is a common needle configuration used for shading and color filling.

What Does M1 Mean?

M1 commonly refers to A 매그넘 바늘 구성. It uses multiple needles arranged in a grouping designed to cover a wider area than a single needle. This makes it useful for shading 와 filling work.

The exact structure can vary across manufacturers. Some product lines use M1 for a specific flat Magnum arrangement, while other naming systems may describe the grouping differently. Artists should check the manufacturer's description rather than rely on the code alone.

M1 describes the needle configuration, not the needle diameter, total width, or taper. These details require separate checks when comparing a PMU cartridge M1 with another model.

Where Are M1 Cartridges Commonly Used?

M1 cartridges are commonly associated with shading 와 color filling in permanent makeup. Depending on the specific design and the artist's technique, they may be used for:

  • Powder brows: Building a soft, shaded appearance across the brow.
  • Ombré brows: Creating a gradual change in color intensity.
  • Selected lip shading techniques: Applying pigment across a broader area of the lips.

Not every M1 cartridge is suitable for every procedure. The needle configuration, diameter, device, and artist's training all affect the selection. Artists should follow the manufacturer's intended-use instructions and their professional training.

How to Read M1 Cartridge Size Specifications

The markings on cartridge packaging can look confusing at first. Breaking them into diameter, needle count, grouping, 와 taper makes it easier to compare cartridge needle sizes without relying on a single number.

Needle Diameter: What Do 0.25 mm, 0.30 mm, 와 0.35 mm Mean?

Needle diameter describes the thickness of an individual needle, usually measured in millimeters. Common examples in PMU products include 0.25 mm, 0.30 mm, 와 0.35 mm, although availability depends on the product line.

These sizes describe different needle thicknesses:

  • 0.25 mm: A relatively fine needle diameter.
  • 0.30 mm: A middle option between the two examples above 와 below.
  • 0.35 mm: A thicker needle diameter than 0.25 mm or 0.30 mm.

Diameter can influence needle rigidity and pigment-transfer characteristics. Still, a larger diameter does not automatically produce darker results, deeper pigment placement, or longer-lasting color.

The best comparison considers diameter alongside needle count, taper, grouping design, 와 the manufacturer's specifications. Artists should not select a diameter based on skin type alone.

Needle Count: What Do 5M1 와 7M1 Indicate?

In common cartridge naming systems, the number before M1 indicates the needle count. A 5M1 typically has five needles, while a 7M1 typically has seven.

특징 5M1 7M1
Typical needle count 5 7
Individual needle diameter Check the product label Check the product label
Potential coverage Depends on grouping design May be wider under comparable conditions
Actual grouping width Verify manufacturer datA Verify manufacturer datA

A higher needle count can change the width 와 distribution of the grouping. It does not guarantee a wider final pigment area or better results in every application.

바늘 간격, 개별 바늘 직경 및 배열은 모두 전체 치수에 영향을 미칩니다. 정확한 비교를 위해서는 바늘 개수만으로 추정하는 대신 에 명시된 그룹화 폭 을 확인하십시오.

게이지 번호와 카트리지 코드는 어떻게 작동합니까?

일부 제조업체는 바늘 사양을 설명하기 위해 게이지 관련 번호 또는 코드로 된 제품명을 사용합니다. 일반적인 예로는 #08, #10, 와 #12, which may correspond to nominal diameters of 0.25 mm, 0.30 mm, 와 0.35 mm in certain product systems.

이러한 매핑은 보편적이지 않습니다.코드에는 바늘 개수, 구성 또는 테이퍼가 포함될 수도 있습니다.

예를 들어, 제품 라벨에는 직경 코드, 바늘 그룹 번호, 그리고 M1이라는 문자가 포함될 수 있습니다. 다른 제품은 순서가 다르거나 특정 디자인에 접미사가 추가될 수 있습니다. 제조사의 사이즈 차트를 확인하여 코드의 각 부분을 확인하십시오.

표준 타투 펜 머신용 ThunderlordPower M1 매그넘 범용 타투 카트리지 니들

Price : $8.99 ~ $22.99
Thunder는 표준 기기에 맞는 범용 타투 및 반영구 메이크업 니들입니다:...
Learn more

How Do Diameter 와 Needle Grouping Affect PMU Cartridge Performance?

사양은 아티스트가 카트리지 디자인을 비교하는 데 도움이 되지만 모든 결과를 예측하는 것은 아닙니다. 각 기능의 역할을 이해하면 성능에 대한 일반적인 주장에 의존하지 않고 차이점을 판단하기가 더 쉬워집니다.

바늘 직경이 강성 및 안료 전사에 미치는 영향

바늘 직경은 각 바늘의 두께와 강성에 영향을 미칩니다. 테이퍼 및 그룹핑을 포함한 다른 디자인 특징도 사용 중 바늘의 성능에 영향을 미칩니다.

가는 바늘과 굵은 바늘은 다르게 작용할 수 있지만, 직경만으로는 색소 유지력, 피부 반응 또는 최종 결과를 예측할 수 없습니다.

반영구 화장용 바늘을 비교할 때는 굵은 바늘이 항상 더 많은 색소를 주입한다고 가정하기보다는 전체 사양을 확인해야 합니다.기기 설정, 시술 기법, 색소 특성 및 시술 목적 또한 결과에 영향을 미칩니다.

바늘 개수 및 그룹 디자인이 커버리지에 미치는 영향

바늘 개수와 그룹 디자인은 카트리지 내 여러 바늘의 배열 방식을 결정합니다.동일한 조건에서 바늘 개수가 많은 그룹은 더 넓은 영역을 커버할 수 있지만, 정확한 크기는 디자인에 따라 다릅니다.

다음 세 가지 측정값은 서로 구별되어야 합니다.

  • 바늘 직경: 개별 바늘의 두께.
  • 그룹 폭: 조립된 바늘 그룹의 물리적 폭.
  • 도포 폭: 한 번의 시술 동안 영향을 받는 영역으로, 시술 기법 및 작업 조건에 따라 달라집니다.

These measurements are related, but they are not interchangeable. A 7M1 cartridge does not always produce a wider application area than every 5M1 cartridge. Different needle spacing or construction can change the comparison.

유사한 M1 카트리지를 비교할 때 테이퍼가 중요한 이유

테이퍼는 바늘대에서 뾰족한 끝으로 이어지는 부분의 모양과 길이를 나타냅니다. 일부 제조업체는 테이퍼를 짧음, 중간, 김, 또는 매우 김으로 분류합니다..

테이퍼는 바늘의 움직임과 색소 전달 특성에 영향을 미칠 수 있습니다. 직경과 바늘 개수가 같은 두 카트리지라도 테이퍼 디자인이 다르면 성능이 다를 수 있습니다.

구매 전 M1 카트리지 비교 방법

명확한 사양을 통해 아티스트는 카트리지를 나란히 비교하고 선택의 폭을 좁힐 수 있습니다.

전체 사양을 나란히 비교하세요

비교표를 사용하여 검토 중인 각 카트리지의 세부 정보를 기록하세요.

사양 카트리지 A 카트리지 B
전체 모델 코드 라벨 확인 라벨 확인
바늘 직경 mm 단위로 기록 mm 단위로 기록
바늘 개수 확인 확인
그룹 구성 M1 디자인 확인 M1 디자인 확인
테이퍼 제조업체 데이터 확인 제조업체 데이터 확인
그룹화 폭 게시 여부 기록 게시 여부 기록
기계 호환성 검증 검증
멸균 및 일회용 라벨링 포장 검증 포장 검증

This method is useful when comparing cartridge needles for PMU from different product lines. It also helps identify missing information that may require confirmation from the supplier.

Check Machine Compatibility 와 Cartridge Construction

Not every cartridge fits every PMU machine. Check the cartridge connection, the device manufacturer's compatibility instructions, 와 any limits listed in the product documentation.

Cartridge construction also deserves attention. Some designs include A membrane intended to help prevent fluid backflow into the device. Check the manufacturer's information to confirm the design 와 its intended function.

Match the Specifications to the Intended Technique

The appropriate cartridge depends on the planned procedure, desired working characteristics, device, 와 the artist's training. A cartridge selected for shading may not be the best option for a different technique.

Artists should also check the sterile packaging and single-use labeling. Use a new sterile cartridge for each client and dispose of used needles in an appropriate sharps container under applicable local requirements.

The FDA warns that unsterile tattooing equipment 와 needles can transmit infections. It also notes that contaminated tattoo inks can cause infections, even when other hygiene practices are followed. Cartridge selection should therefore include hygiene 와 product handling, not just size and performance.

Compare the Complete M1 Cartridge Specifications

M1 identifies a needle configuration, but it does not describe every feature that affects cartridge selection. Diameter, needle count, grouping design, 와 taper each provide different information.

Before purchasing, compare the complete model code, confirm machine compatibility, 와 check the manufacturer's specifications. A clear comparison helps PMU artists choose equipment that fits their intended technique and professional requirements.

FAQs About PMU M1 Cartridge Sizes

Q1: Are M1 Cartridges Compatible With All PMU Machines?

번호 Compatibility depends on the cartridge connection 와 the machine's design. Check the device manufacturer's instructions and confirm that the specific cartridge model is supported.

Q2: What Is the Difference Between M1 와 RM or CM Cartridges?

M1 commonly refers to a Magnum grouping, while RM or CM often identifies A curved Magnum design. The curved edge changes the needle arrangement, but naming conventions vary by manufacturer. Check the product specifications to confirm the exact construction.

Q3: Can M1 Cartridges Be Used for Lip Blush?

Some M1 designs may be intended for selected lip-shading techniques, but not every configuration is suitable for lip blush. Artists should follow the cartridge manufacturer's intended-use instructions, their training, and the requirements of the procedure.

Q4: How Should PMU Cartridge Needles Be Stored 와 Disposed Of?

Keep sterile cartridges in their original packaging according to the manufacturer's storage instructions. Check package integrity before use, never reuse a single-use cartridge, and place used needles in an appropriate sharps container. Follow local rules for sharps disposal and infection control.

바이오마서 타투

바이오마서 타투

2002에 설립된 Biomaser은 반영구 화장 및 문신 기계, 카트리지, 색소 전문 기업으로, 70+ 시장의 전문가들에게 서비스를 제공합니다. "예술 · 기술 · 아름다움"이라는 철학을 바탕으로, Biomaser은 "아티스트와 더 많은 것을 연결한다"는 비전을 추구합니다.