Explicação sobre os tamanhos dos cartuchos PMU M1: como comparar o diâmetro e o agrupamento das agulhas.

Por Tatuagem de Biomaser
A sigla M1 refere-se à configuração da agulha, não ao tamanho total do cartucho. Este guia separa o diâmetro, a quantidade de agulhas, a largura do agrupamento e a conicidade, com uma lista de verificação lado a lado para comparar os cartuchos.
Explicação sobre os tamanhos dos cartuchos PMU M1: como comparar o diâmetro e o agrupamento das agulhas.

Principais conclusões

  • M1 identifica uma configuração de agulha, não o tamanho total de um cartucho.
  • O diâmetro e a quantidade de agulhas descrevem duas características diferentes.
  • O design de agrupamento, a conicidade e a compatibilidade com a máquina também afetam a seleção do cartucho.
  • Verifique o código completo do produto e as especificações do fabricante antes de comprar.

Two PMU M1 cartridges can carry the same label but have different diameters, needle counts, and designs. Knowing how to read these details helps artists compare products and select suitable equipment for their work. This starts with identifying the M1 configuration, then checking the specifications that affect its working characteristics.

What Is an M1 PMU Cartridge?

M1 é uma configuração de agulhas comum usada para sombreamento e preenchimento de cores..

O que significa M1?

M1 geralmente se refere a uma configuração de agulhas Magnum.Ela usa várias agulhas dispostas em um grupo projetado para cobrir uma área maior do que uma única agulha. Isso a torna útil para trabalhos de sombreamento e preenchimento.

A estrutura exata pode variar entre os fabricantes. Algumas linhas de produtos usam M1 para um arranjo Magnum plano específico, enquanto outros sistemas de nomenclatura podem descrever o agrupamento de forma diferente. Os artistas devem verificar a descrição do fabricante em vez de confiar apenas no código.

M1 descreve a configuração da agulha, not the needle diameter, total width, or taper. These details require separate checks when comparing a PMU cartridge M1 with another model.

Onde os cartuchos M1 são comumente usados?

Os cartuchos M1 são comumente associados ao sombreamento e preenchimento de cor em maquiagem permanente. Dependendo do design específico e da técnica do artista, eles podem ser usados ​​para:

  • Sobrancelhas esfumadas: Criar uma aparência suave e sombreada na sobrancelha.
  • Sobrancelhas Ombré: Criando uma mudança gradual na intensidade da cor.
  • Técnicas selecionadas de sombreamento labial: Aplicando pigmento em uma área maior dos lábios.

Nem todos os cartuchos M1 são adequados para todos os procedimentos. A configuração da agulha, o diâmetro, o dispositivo e o treinamento do profissional influenciam a seleção. Os profissionais devem seguir as instruções de uso do fabricante e seu treinamento profissional.

Como Ler as Especificações de Tamanho do Cartucho M1

As marcações na embalagem do cartucho podem parecer confusas à primeira vista. Dividi-las em diâmetro, número de agulhas, agrupamento e conicidade facilita a comparação dos tamanhos de agulha do cartucho sem depender de um único número.

Needle Diameter: What Do 0.25 mm, 0.30 mm, and 0.35 mm Mean?

O diâmetro da agulha descreve a espessura de uma agulha individual, usually measured in millimeters. Common examples in PMU products include 0.25 mm, 0.30 mm, and 0.35 mm, although availability depends on the product line.

Esses tamanhos descrevem diferentes espessuras de agulha:

  • 0.25 mm: Um diâmetro de agulha relativamente fino.
  • 0.30 mm: Uma opção intermediária entre os dois exemplos acima e abaixo.
  • 0.35 mm: A thicker needle diameter than 0.25 mm or 0.30 mm.

O diâmetro pode influenciar a rigidez da agulha e as características de transferência de pigmento. No entanto, um diâmetro maior não produz automaticamente resultados mais escuros, aplicação de pigmento mais profunda ou cor mais duradoura.

A melhor comparação considera o diâmetro juntamente com a quantidade de agulhas, a conicidade, o design do agrupamento e as especificações do fabricante. Os artistas não devem selecionar um diâmetro com base apenas no tipo de pele.

Needle Count: What Do 5M1 and 7M1 Indicate?

Em sistemas comuns de nomenclatura de cartuchos, o número antes de M1 indica a contagem de agulhas. A 5M1 typically has five needles, while a 7M1 typically has seven.

Característica 5M1 7M1
Número típico de agulhas 5 7
Diâmetro individual da agulha Consulte o rótulo do produto Consulte o rótulo do produto
Cobertura potencial Depende do design do agrupamento Pode ser mais ampla em condições comparáveis ​​
Largura real do agrupamento Verifique os dados do fabricante Verifique os dados do fabricante

Um número maior de agulhas pode alterar a largura e a distribuição do agrupamento. Isso não garante uma área de pigmento final maior ou melhores resultados em todas as aplicações.

The spacing between needles, individual needle diameter, and arrangement all affect the overall dimensions. For an accurate comparison, look for A published grouping width rather than estimating it from the needle count alone.

How Do Gauge Numbers and Cartridge Codes Work?

Some manufacturers use gauge-related numbers or coded product names to describe needle specifications. Common examples include #08, #10, and #12, which may correspond to nominal diameters of 0.25 mm, 0.30 mm, and 0.35 mm in certain product systems.

These mappings are not universal. A code may also include the needle count, configuration, or taper.

For example, a product label might include a diameter code, a number for the needle grouping, and the letters M1. Other products may use a different order or add a suffix for a specific design. Check the manufacturer's size chart to confirm each part of the code.

Cartuchos de agulhas universais ThunderlordPower M1 Magnum para canetas de tatuagem padrão

Price : $8.99 ~ $22.99
Thunder é uma gama de agulhas universais para tatuagem e...
Learn more

How Do Diameter and Needle Grouping Affect PMU Cartridge Performance?

Specifications help artists compare cartridge designs, but they do not predict every result. Understanding the role of each feature makes it easier to judge the differences without relying on broad claims about performance.

How Needle Diameter Influences Rigidity and Pigment Transfer

Needle diameter affects the thickness and rigidity of each needle. Other design features, including taper and grouping, also influence how the needle performs during use.

A finer needle and a thicker needle may behave differently, but diameter alone cannot predict pigment retention, skin response, or the finished appearance.

When comparing permanent makeup needles, look at the full specification rather than assuming that a thicker needle always deposits more pigment. Machine settings, technique, pigment properties, and the intended procedure also contribute to the outcome.

How Needle Count and Grouping Design Affect Coverage

Needle count and grouping design determine how multiple needles are arranged within the cartridge. Under comparable conditions, a grouping with more needles may cover a wider area, but the exact dimensions depend on the design.

Três medidas devem permanecer distintas:

  • Diâmetro da agulha: A espessura de uma agulha individual.
  • Largura do grupo: A largura física do grupo de agulhas montado.
  • Largura de aplicação: A área afetada durante uma passada, que também depende da técnica e das condições de operação.

These measurements are related, but they are not interchangeable. A 7M1 cartridge does not always produce a wider application area than every 5M1 cartridge. Different needle spacing or construction can change the comparison.

Por que o cone é importante ao comparar cartuchos M1 semelhantes

O cone descreve o formato e o comprimento da transição entre a haste da agulha e sua ponta. Alguns fabricantes classificam o cone como curto, médio, longo ou extra longo..

O cone pode afetar o comportamento da agulha e as características de transferência de pigmento. Dois cartuchos com o mesmo diâmetro e número de agulhas podem apresentar desempenhos diferentes se seus designs de cone forem distintos.

Como comparar cartuchos M1 antes de comprar

Especificações claras facilitam a comparação lado a lado dos cartuchos pelos artistas e reduzem suas opções.

Compare as especificações completas lado a lado

Use uma tabela comparativa para registrar os detalhes de cada cartucho em consideração.

Especificação Cartucho A Cartucho B
Código completo do modelo Etiqueta de verificação Etiqueta de verificação
Diâmetro da agulha Registro em mm Registro em mm
Número de agulhas Confirmar Confirmar
Configuração de agrupamento Confirmar design M1 Confirmar design M1
Conicidade Verificar dados do fabricante Verificar dados do fabricante
Largura de agrupamento Registrar se publicado Registrar se publicado
Compatibilidade com a máquina Verificar Verificar
Esterilidade e rotulagem de uso único Verificar embalagem Verificar embalagem

This method is useful when comparing cartridge needles for PMU from different product lines. It also helps identify missing information that may require confirmation from the supplier.

Check Machine Compatibility and Cartridge Construction

Not every cartridge fits every PMU machine. Check the cartridge connection, the device manufacturer's compatibility instructions, and any limits listed in the product documentation.

Cartridge construction also deserves attention. Some designs include A membrane intended to help prevent fluid backflow into the device. Check the manufacturer's information to confirm the design and its intended function.

Match the Specifications to the Intended Technique

The appropriate cartridge depends on the planned procedure, desired working characteristics, device, and the artist's training. A cartridge selected for shading may not be the best option for a different technique.

Artists should also check the sterile packaging and single-use labeling. Use A new sterile cartridge for each client and dispose of used needles in an appropriate sharps container under applicable local requirements.

The FDA warns that unsterile tattooing equipment and needles can transmit infections. It also notes that contaminated tattoo inks can cause infections, even when other hygiene practices are followed. Cartridge selection should therefore include hygiene and product handling, not just size and performance.

Compare the Complete M1 Cartridge Specifications

M1 identifies a needle configuration, but it does not describe every feature that affects cartridge selection. Diameter, needle count, grouping design, and taper each provide different information.

Before purchasing, compare the complete model code, confirm machine compatibility, and check the manufacturer's specifications. A clear comparison helps PMU artists choose equipment that fits their intended technique and professional requirements.

FAQs About PMU M1 Cartridge Sizes

Q1: Are M1 Cartridges Compatible With All PMU Machines?

Não. Compatibility depends on the cartridge connection and the machine's design. Check the device manufacturer's instructions and confirm that the specific cartridge model is supported.

Q2: What Is the Difference Between M1 and RM or CM Cartridges?

M1 commonly refers to a Magnum grouping, while RM or CM often identifies A curved Magnum design. The curved edge changes the needle arrangement, but naming conventions vary by manufacturer. Check the product specifications to confirm the exact construction.

Q3: Can M1 Cartridges Be Used for Lip Blush?

Some M1 designs may be intended for selected lip-shading techniques, but not every configuration is suitable for lip blush. Artists should follow the cartridge manufacturer's intended-use instructions, their training, and the requirements of the procedure.

Q4: How Should PMU Cartridge Needles Be Stored and Disposed Of?

Keep sterile cartridges in their original packaging according to the manufacturer's storage instructions. Check package integrity before use, never reuse a single-use cartridge, and place used needles in an appropriate sharps container. Follow local rules for sharps disposal and infection control.

Tatuagem de Biomaser

Tatuagem de Biomaser

Fundada em 2002, a Biomaser é especializada em máquinas, cartuchos e pigmentos para maquilhagem permanente e tatuagem, e serve profissionais em mais de 70 mercados. Orientada por «Arte · Tecnologia · Beleza», segue a sua visão de aproximar os artistas de novas possibilidades.